|
Jabsco
|
Manufacturer Part Number :
18220-1127
|
Jabsco Wakeboard Boat Ballast Pump
The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them.
Detailed Description
Ballast Puppy Wakeboard Ballast Pump
The Ballast Puppy is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 11 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
- Fills a typical 40 gallon ballast tank in under 5 minutes.
- Reversible to both fill and empty ballast tanks.
- Self-Priming and non air-locking.
- Exclusive (Patent pending) Run-dry Protection shuts off pump before impeller is damaged.
- 12 volt Pump with Nitrile Impeller.
Dimensions |
9.3 high; 18.2 long; 12.0 wide; cms [3-5/8] high; [7-1/8] long; [4-3/4] wide; inches |
Pump |
Bronze |
Impeller |
Jabsco Neoprene compound |
Seal |
Lip Type |
Weight |
6 lb 2.7 kg |
Port(s) |
1/2" Internal Pipe Threads 1" External Hose Barb |
Motor |
Equipped with Run-Dry Protection Device (Patent Pending) 12 Volt DC Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible |
Rating |
CE; Motors meet USCG Electrical Regulation 183.410 and ISO 8846 MARINE for IGNITION PROTECTION on gasoline powered vessels |
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|